Small lifting lever pin 77.60.168‑1 is used in the linkage of HTZ tractors for fixing braces with lifting arms.
Usually it is installed through the right lifting lever 150.56.152A, less often through the left one 150.56.151A, and enters the hole in the brace shackle 77.60.164-1A, reliably connecting the braces (assembled 150.56.039) with the levers. This fixation ensures the transfer of force from the hydraulic cylinders to the lower links of the hitch.
The part is made of durable steel, resistant to high loads and wear.
Usually it is installed through the right lifting lever 150.56.152A, less often through the left one 150.56.151A, and enters the hole in the brace shackle 77.60.164-1A, reliably connecting the braces (assembled 150.56.039) with the levers. This fixation ensures the transfer of force from the hydraulic cylinders to the lower links of the hitch.
The part is made of durable steel, resistant to high loads and wear.
It is used on tractors T-150, T-151, T-156, HTZ-17221, HTZ-242K, HTZ-248K and others with a similar attachment system.
-
Chassis type wheeled/tracked
-
Applicability by brand HTZ
-
Number of uses in a unit/technique 2 pcs
-
Installation location lifting lever / brace shackle
-
Catalog number 77.60.168-1
-
Node attachment
-
Length 10 cm