Gear 151.37.210-5 z=33 fourth gear of the input shaft for HTZ tractors
Gear 151.37.210-5 (z=33) is designed for installation in the transmission of HTZ wheeled tractors and performs the function of fourth gearinput shaft. It is used on tractors of various years of manufacture and is adapted for different versions of transmission units.
Features:
-
Equipped with a seat for the locking ring 2С65.13940, however, versions are also available without a seat, which is important to consider when selecting
-
Works in tandem with gears:
-
151.37.110-4 (z=32×46) - a new model, designed for bearing 50115.2893
-
151.37.110-3 (z=32×46) - old model, calculated for bearing 1000915 according to GOST 8338-57
-
Purpose:
-
Rotation transmission in fourth gear of the transmission
-
Ensuring reliable and stable operation of the gearbox in any operating conditions
Benefits:
-
Full compatibility with transmissions of HTZ tractors
-
Possibility of selection for a specific modification of the unit (old or new model)
-
Constructed from durable steel that is heat treated for durability
In stock. Delivery throughout Ukraine and abroad
- Gears
-
Front lug width 26 mm
-
Front projection diameter 80 mm
-
Rear lug width 10,5 mm
-
Rear protrusion diameter 87 mm
-
Spline hole designation d8 x 56 x 65
-
Under the circlip 2С65.13940
-
Width 64 mm
-
Type ring gear
-
Module 5 = m
-
Teeth width 27,5 mm
-
Ring diameter 175 mm
-
Designation of the mating wheel 151.37.110
-
Number of teeth z33
-
Number of ring gears 1
-
Gear fourth
-
Chassis type wheeled
-
Applicability by brand HTZ
-
Number of uses in a unit/technique 1 pcs
-
Installation location 150.37.104-4
-
Weight 3.67 kg
-
Catalog number 151.37.210-5
-
Node gearbox
-
Front Overhang Width 26mm