Gear 150.38.104-4is the driven (crown) gear of the main drive of the T-150 tractor. In everyday life it is also known as "planetary". This is a massive bevel gear with the number of teeth Z=40, which is attached with 12 bolts to the differential housing axle. The driven wheel receives rotation from the drive shank and, through the differential, evenly distributes torque between the wheel axles.
Gear 150.38.104-4 is used in gearboxes of front and rear axles of HTZ tractors of models T-150, T-151, T-156, T-17221, T-17021and others modifications. There are two versions of this part - with holes for bolts with a diameter of 12 mm or 14 mm, depending on the configuration. If the driven gear 150.38.104-4 is installed together with the drive gear 150.38.103-2, then When assembled, they form a node under the designation 150.38.013, which is called main pair gears.
It is made of durable alloy steel in accordance with GOST, which ensures high hardness of working surfaces, resistance to wear and long service life even under intensive use.
- Gears
-
Mounting hole width 16 mm
-
Ring diameter 371 mm
-
Diameter of mounting holes на 14 или 12 mm
-
Number of mounting holes 12 pcs
-
Bore diameter 228 mm
-
Front bore diameter 270 mm
-
Tooth line direction Правое
-
Tooth type Круговой
-
Width 48 mm
-
Type планетарная
-
Designation of the mating wheel 150.38.103-2
-
Number of teeth z=40
-
Chassis type колесная
-
Applicability by brand ХТЗ
-
Number of uses in a unit/technique 2 pcs
-
Installation location 150.38.013
-
Weight 12,64кг
-
Catalog number 150.38.104-4
-
Node передний и задний мост
